Table of Contents
Advertisement
List of Labeling+ Items
Item name
Color
This item selects the color whose area and center of gravity are to be measured.Since the color
(for color
hue, color saturation, and brightness can be selected, then fine-tuning can be performed to colors.
cameras
Reference:
only)
Binary
This item specifies the binary level for converting 256-tone grayscale images input from the camera
(for
into binary images.
monochrome
Converted white pixels are measured.Adjust the binary level so that the measurement object is
cameras
converted to white pixels.
only)
Reference:
This item is used to set up the measurement area.
Region
While the input image can be measured as a whole, a quick and reliable measurement can be
setting
performed by set up the measured range.
Reference:
This item can be changed if necessary.Usually, the central position of the registered region is
Ref. position
registered as the reference position.
Reference:
Specify the feature to extract.
Extraction
Reference:
Set the labeling conditions.Specify the labeling processing, number of labels and sorting conditions.
Measurement parameter can be changed as needed to address unstable measurement results or to
Measurement
increase the processing speed.Normally, the factory default value will be used.
Reference:
This item specifies the judgement condition for measurement results.
Judgement
Reference:
FZ3 Processing Items List Manual
Color Specification (Labeling+) (p.192)
Binarization (Labeling+) (p.194)
Region Setting (Labeling+) (p.196)
Reference Position (Labeling+) (p.197)
Extraction Conditions (Labeling+) (p.198)
Measurement Parameters (Labeling+) (p.200)
Judgement Conditions (Labeling+) (p.204)
Description
Labeling+
191
2
Advertisement
Table of Contents
