Table of Contents
Advertisement
Extract Color Filter
The color image is extracted by color.Up to 8 ranges can be set.
However, this processing item cannot be used with monochrome images.
Used in the Following Case
To extract an object of different color.
●
3
Color Specification (Extract Color Filter)
When connecting a color camera, specify the color to be measured.There are two specification methods:
specifying the color to be extracted in the image or specifying the color with the hue, saturation, and
brightness values.
This section describes how to specify colors in an image and gives an example of the procedure for
finely adjusting with numeric input afterwards.
1.
In the Item Tab area, tap [Color setting].
2.
Place a check at [Auto setting].
3.
In the Image Display area, specify the color range you want to detect by dragging the cursor from
the upper left corner to the lower right corner of that area.
The color of the specified area is automatically set.
306
Extract Color Filter
FZ3 Processing Items List Manual
Advertisement
Table of Contents
