Halation Cut; Filter Setting (Halation Cut+) - Omron XPECTIA FZ3 User Manual

Halation Cut+

This is a processing item for just FZ3-H
Using the characteristic that halation occurs if the lighting causes reflection within the camera, just the
wavelength of mirror reflected light is suppressed to eliminate halation
When a color image is shot with red and blue lighting used together, this converts the image into a
monochrome image with the red or blue mirror reflected light removed.
Used in the Following Case
To create a monochrome image with halation removed
●
Important
When FZ3-H series dedicated processing items are used, processing is carried out that reduces the
●
processing time from the second time on. Therefore, when measuring the same image, the processing for the
first time after the controller is started up may be longer than the processing time from the second time on.

Filter Setting (Halation Cut+)

This item sets the filter.
1.
In the Item Tab area, tap [Filter Setting].
FZ3 Processing Items List Manual
series high grade controllers.
Halation Cut+ 317
3