Table of Contents
Advertisement
Setting item
2
Mode
Skipping
angle
Edge pitch
[Note 1]: Comparison is with the pixel separated by exactly the comparison interval (the value
set in "Edge Pitch").
278
Circle Angle
Set value
[Factory
default]
This option compares the color difference with the surrounding pixels
[Search]
and determines the angle based on the color information.
The angle is determined based on the position of the points with a
large color difference from the neighboring pixels
This mode is suitable for the following types of measurement objects.
Edge
The angle is determined based on the position of the points with a
large color difference from the surrounding pixels
This mode is suitable for the following types of measurement objects.
Defect
Specify the interval degrees for extracting points.The color of all the
points on the circumference (360 ° circumference/skipping angle)
corresponding to the set skipping angle.
0.1 to 10
[0.4]
For the initial setting, the optimal value will be automatically set up
based on the radius of the drawn circle.
The bigger the value set, the faster the processing, but the lower the
detection angle and rotation precision.
1 to 99
Specify the spacing for calculating the color difference.
[10]
This item is enabled only when "Mode" is set to "Edge" or "Defect".
Description
.
[Note 1]
.
[Note 1]
FZ3 Processing Items List Manual
Advertisement
Table of Contents
