Measurement Results For Which Output Is Possible (Ec Circle Search) - Omron XPECTIA FZ3 User Manual

Circle register
When the processing speed is slow
Parameter to be adjusted
Region setting
Measurement

Measurement Results for Which Output Is Possible (EC Circle Search)

The following values can be output using processing items related to results output.It is also possible to
reference measurement values from expressions and other processing units.
Character
Measurement items
string
Judgement JG
Measurement
X
coordinate X
Measurement
Y
coordinate Y
Reference position X SX
Reference position Y SY
EC correlation value CR
Radius RA
Count CT
Position N XN
Position N YN
Evaluation N CRN
Radius N RAN
FZ3 Processing Items List Manual
Mask any unnecessary items.
Lower the edge level.
Make the search region as small as possible.
If images that should be judged OK vary little, specify a larger value for "Evaluation".
Judgement result
X coordinate of the position where the circle is detected
Y coordinate of the position where the circle is detected
X coordinate of the reference position of the registered circle
Y coordinate of the reference position of the registered circle
Evaluated value of circle detected
Radius of circles detected
Quantity of circles detected
Detected circle N position X (N = 0 to 255)
Detected circle N position Y (N = 0 to 255)
Detected circle N circle evaluated value (N = 0 to 255)
Detected circle N circle radius (N = 0 to 255)
Processing
Description
EC Circle Search
2
93