3.
Set the target image.
Set value
Setting item
[Factory
default]
Camera
image
Target
[ Prev. unit
image ]
4.
This sets the filter settings.
Set value
Setting item
[Factory default]
[Light]
●
Defect
Darkness
●
brightness
Light and
●
darkness
[Normal
●
pattern]
Vertical
●
stripes
Pattern kind
Horizontal
●
stripes
Cross
●
stripes
5.
Set the details.
Pattern kind: "Normal pattern", "Vertical stripes", or "Horizontal stripes"
Set value
Setting item
[Factory
default]
3 to 63
Defect size
[3]
1 to 63
Gain
[3]
FZ3 Processing Items List Manual
The camera input image that has not been subject to filtering is
subject to compensation as is.
Images to which processing is applied in units even before the
"Stripes Removal Filter+" being set are the targets.
Set the brightness of defects to be extracted from the
background.To detect both white defects and black defects, select
"Light and darkness".
Select the pattern design to be eliminated as background.
Normal: Used to eliminate patterns without the specified
pattern.The pattern eliminated must be adequately larger than the
defect to be extracted.
Vertical stripe: Vertical stripe patterns are eliminated.
Horizontal stripe: Horizontal stripe patterns are eliminated.
Grid: Grid patterns are eliminated
Specify a larger value to match the size of the defects to be extracted.
Adjust the contrast of an image after the pattern suppression.
Specifying a larger value emphasizes the density differences within
the image.
Description
Description
Description
Stripes Removal Filter+
3
315