Reference:
3.
After setting up the expression, tap [OK].
The expression is confirmed.
Line 1 (Line Regression)
"Line 1" is only valid if "Calculate cross point and angle of two lines" is selected in Select function.
The set up method is the same as for [Line 0].
●
Reference:
4
Point (Line Regression)
"Point" is only valid if "Calculate distance between line and point" is selected in "Select function".
1.
Tap [Point] in the Item Tab area.
2.
Tap [ ... ].
The Setting Expression window is displayed.
3.
Set up the expression.
Sub-menus that can be set in expressions depending on the processing unit are displayed.When
the sub-menu is tapped, it is added to the Exp.
Reference:
4.
After setting up the expression, tap [OK].
The expression is confirmed.
Key Points for Test Measurement and Adjustment (Line Regression)
The following content can be confirmed in the "Detail result" area using text.
344
Line Regression
Layout of Setting Expression Window (p.333)
Line 0 (Line Regression) (p.342)
Layout of Setting Expression Window (p.333)
FZ3 Processing Items List Manual