Stripes Removal Filter; Filter Setting (Stripes Removal Filter+) - Omron XPECTIA FZ3 User Manual

Stripes Removal Filter+

This is a processing item for just FZ3-H
Eliminating a striped pattern or other background makes it possible to stably extract just the defect
without it being affected by the background.
When using a color camera, insert a color gray filter before this unit.
Used in the Following Case
3
To eliminate vertical stripes, horizontal stripes, or a grid of stripes from the target.
●
Important
When FZ3-H
●
processing time from the second time on. Therefore, when measuring the same image, the processing for the
first time after the controller is started up may be longer than the processing time from the second time on.

Filter Setting (Stripes Removal Filter+)

This item sets the filter.
1.
In the Item Tab area, tap [Filter Setting].
2.
In the "Display mode" area, tap [Change display] to switch between camera image types.
The displayed contents of the Image Display area will be switched.
Setting item
Display
mode
314 Stripes Removal Filter+
series dedicated processing items are used, processing is carried out that reduces the
Set value
[Factory
default]
Through The latest image is always input from the camera and displayed.
The image that was scanned in the immediately preceding
[Freeze]
measurement is displayed.
series high grade controllers.
Description
FZ3 Processing Items List Manual