Model Registration (Search) - Omron XPECTIA FZ3 User Manual

List of Search Items
Item name
This item registers the pattern characteristic of the measurement image as a model.
Model Model parameter values can be changed as needed to address unstable measurement results or to
register increase the processing speed.Normally, the factory default value will be used.
Reference:
This item is used to set up the measurement area.
Region Instead of measuring the entire input image, narrowing the measurement area shortens the
setting processing time.
Reference:
This item can be changed if necessary.Specify a position in the model that should be used as the
Detection detection coordinates during measurement. Usually, the central position of the set model is
point registered as the detection coordinates.
Reference:
This item can be changed if necessary.Specify the reference position within the camera's field of
Ref. position view.
Reference:
This item specifies the judgement condition for measurement results.Specify the criteria to judge the
Measurement measurement result if the X and Y coordinates and the correlation with the model are OK.
Reference:
This item can be changed if necessary.Normally, the factory default value will be used.
Output
Use the output parameter to specify how to handle the coordinates.
parameter
Reference:

Model Registration (Search)

Register the parts to measure as the model.
The position at the time of registration is also registered in the model information.Place the
measurement object in the correct position when registering a model.
1.
In the Item Tab area, tap [Model register].
When setting a new model, you do not have to tap [Model register].
FZ3 Processing Items List Manual
Model Registration (Search) (p.43)
Region Setting (Search) (p.46)
Detection Point (Search) (p.47)
Reference Position (Search) (p.47)
Measurement Parameters (Search) (p.48)
Output Parameters (Search) (p.50)
Description
2
Search 43