Display area No.
2
3.
Set the value of each item in the "Measurement" area.
For color cameras:
Setting item
Edge level
Edge color
level
For monochrome cameras:
150
Scan Edge Width
Set value
Setting item
[factory default]
[0] to 99
[Checked]
●
Enabled
Unchecked
●
[Forward
●
area]
Reverse
●
area
Set value
[factory default]
Position (%) for width
●
of a color
0 to 100 [50]
Value of color
●
0 to 442 [20]
0 to 442
[100]
Description
This item uses the scan region of which edge
profile is displayed.
Specify enable/disable of the divided area.When
disabled (unchecked) is specified, measurement is
not performed.
Forward area: The edge is searched from the start
point of the area toward the end point.
Reverse area: The edge is searched from the end
point of the area toward the start point.
Description
Select a color difference level with which the edge is
detected.
Reference:
See "User's Manual", "Edge level" (p.304)
This emphasis level can be specified only if the edge
color to detect is specified.
FZ3 Processing Items List Manual