Table of Contents
Advertisement
Setting item
Images that are different from the model will be converted into binary images
internally."Inspection" that is used to detect binary images should be selected.
[Binary area]
Inspection
Labeling
If "Binary area" is selected, the following operations are not necessary.
When Labeling is selected, the following items are set.
Item
0 to 2499
Label No.
[0]
FZ3 Processing Items List Manual
Set value
[Factory default]
Set value
[Factory default]
Specify the label number used to determine whether
defects exist.
Different settings for "Sort condition" will lead to
different number assignment.
Description
Defect is judged based on the total area of
white pixels.
A white pixel will be detected as 1 label,
which is then compared with a label which
is consistent with the set conditions to
determine whether or not it is a defect.
Description
Fine Matching
2
231
Advertisement
Table of Contents
