2.
Specify each of the following items.
2
Output coordinates
Calibration
Reflect to overall
judgement
Display cursor setting
Key Points for Test Measurement and Adjustment (Sensitive Search)
The following content is displayed in the "Detail result" area as text.
Note
Executing test measurements will also update the measurement results and the figures in the image.
●
Displayed items
Judge
Correlation
Position X
Position Y
70
Sensitive Search
Set value
Setting item
[factory
default]
[After
●
scroll]
Before
●
scroll
[OFF]
●
ON
●
[ON]
●
OFF
●
[ON]
●
Position
OFF
●
ON
●
Sub-region
[OFF]
●
Judgement result
Lowest correlation value in the sub-region
X coordinate of the position where the model is detected
Y coordinate of the position where the model is detected
Description
As measurement results, select whether to output
coordinate values to external devices before or after
the position deflection correction is applied.
Select whether to reflect the calibration in the values
output to the external device as measurement results.
ON: Output the coordinates converted into actual
dimensions.
OFF: Output the camera coordinate values.
Enables choosing whether or not the judgement results
of this processing unit is reflected in the scene overall
judgement.
The measurement coordinate position of the detected
model is displayed at the cursor.
The coordinate position of the region with the lowest
correlation value of the sub-regions is displayed at the
cursor.
Description
FZ3 Processing Items List Manual