Table of Contents
Advertisement
The judgement is NG (insufficient memory).
Parameter to be adjusted
Region setting
When the processing speed is slow
2
Parameter to be adjusted
Region setting
Measurement Results for Which Output Is Possible (Character Inspection)
The following values can be output using processing items related to results output. It is also possible to
reference measurement values from expressions and other processing units.
Measurement items
Judgement
Number of Characters
NG cause
For following items, additional expression data with 32 characters is allocated for each character. (* represents the
character number.)
Unit No.*
Index No.*
Model No.*
Character code*
NG Cause *
About Output at PLC Link
1.
About output of character inspection
If PLC link communication is performed, selecting the "Character output" check box among the
output parameters for character inspection will cause character string data to be output to the
PLC link output area. (FZ3 Ver. 2.10 or later)
If 32 characters are read (read character string: 0123456789...UV), a continuous ASCII code
data string is output as shown below.
Output area
Top channel
+0ch
+1ch
･
･
･
242
Character Inspection
Specify as small a value as possible for FigureInfo=Region.
Specify as small a value as possible for FigureInfo=Region.
Character
string
JG
NUM
NG
CUNO*
CINDEX*
CMODEL*
CCHAR*
CNG*
Name
1st character,
3031 (ASCII code corresponding to character "0," ASCII code
2nd character
corresponding to character "1")
3rd
3233 (ASCII code corresponding to character "2," ASCII code
character, 4th
corresponding to character "3")
character
Remedy
Remedy
Description
Judgement result
Chara. Num
NG cause
Detected unit No. for the *th character
Detected index number for the *th character
Detected model number for the *th character
Character code for the *th character
Reference: "User's Manual", "Character Code Table" (p.334)
NG cause for the *th character
Output contents
FZ3 Processing Items List Manual
Advertisement
Table of Contents
