Omron XPECTIA FZ3 User Manual page 51

Candidate 0 to 100
LV [70]
When executing a multi search
Setting item
[factory default]
Multiple Checked
●
output [Unchecked]
●
0 to 100
Detail LV
[75]
Corr. ascending
●
[Corr. descending]
●
Sort X ascending
●
condition X descending
●
Y ascending
●
Y descending
●
0 to 31
Search No.
[0]
3.
When the setting has been changed, tap [Measurement] in the Detail area to verify whether
measurements can be made correctly.
4.
Set up the judgement condition.
Note
The values beside each item are measurement results of the displayed image.Take these values into
●
consideration to determine the upper and lower limits.
Setting item Set value
Count 0 to 32
-99999.9999
Measure X to
99999.9999
-99999.9999
Measure Y to
99999.9999
FZ3 Processing Items List Manual
Specify the threshold value with which to detect candidate points
in a rough search.Specify a smaller value when model search
results are unreliable.
Set value
Select to execute a multi search.
Specify the threshold value with which to detect candidate
points in a detail search.
Specify the conditions by which the search number is
re-assigned.
When sorting referencing the X and Y coordinates, the
upper left is the origin.
Input the search number for outputting the data.
Specify the number of detections that are judged to be OK.
Specify the range of X-axis shifting that is judged to be OK.
Specify the range of Y-axis shifting that is judged to be OK.
Description
Description
2
Search 49