Reference Position (Labeling) - Omron XPECTIA FZ3 User Manual

For monochrome cameras:
2
Setting item
Binary image

Reference Position (Labeling)

This item can be changed if necessary.When the region is set, the reference position is automatically set
at the center of gravity of the measurement region. In the same way for the reference area, when the
region settings are made, they are set automatically based on the measurement region.
This item can be used to change the reference position to any desired position.
1.
In the Item Tab area, tap [Ref. position].
In the Image Display area, the current reference position will be displayed as the crosshair
cursor.
2.
Tap the position to be set as the reference position.
Note
Displaying the image enlarged makes this tapping easier.
●
Reference:
3.
If necessary, finely adjust with numeric input and the arrow buttons.
4.
If necessary, in the "Display setting" area, set up display settings for the images displayed in the
Image Display area.
178 Labeling
Set value
[Factory default]
[Checked]
●
Unchecked
●
"Using the Zoom Function" in the "User's Manual" (p.317)
Description
The image is displayed in binary with black and
white.
FZ3 Processing Items List Manual