Table of Contents
Advertisement
Note
Measurement mode
●
In Precise Defect measurement, the measurement mode depends on the number of registered region
figures and their types.The way to make elements depends on the measurement mode. The relationship
between the figure and measurement mode is as in the table below.
Measurement
Line
mode
Line mode:
The direction parallel to the measurement region straight line is the X axis and the direction
●
perpendicular is the Y axis.The shape of elements is rectangular. The element width and length are
the number of pixels specified with the element size X and Y.
Wide circle and arc mode:
The circumferential direction along the measurement region wide circle (arc) is the X axis and the
●
radial direction is the Y axis.The shape of elements is fan-shaped. If the circumference length of the
wide circle (arc) of the measurement region is set to N, the element circumferential direction width is
360 degrees x the element size X / N. The element radial direction width is the number of pixels
specified with the element size Y. The element circumferential direction width is defined as an angle,
so the closer the element to the outer circumference, the larger the element.
Region mode:
The direction parallel to the measurement region is the X axis and the direction perpendicular is the
●
Y axis.The shape of elements is rectangular.The element width and length are the number of pixels
specified with the element size X and Y.
3.
If necessary, set the value of each item in the "Measurement condition" area.
Value input method: Reference:
The "Area meas. LV" can be set also by dragging the slider or by tapping the buttons at the ends
of the slider.
For color cameras:
For monochrome cameras:
FZ3 Processing Items List Manual
Single figure
Line
Circumference
Wide circle
Wide circle
and arc
and arc
See the "User's Manual", "Inputting Values" (p.313)
Arc
Ellipse
Rectangle Polygon
Region
Region
Multiple
figures
Region Region
Precise Defect
221
2
Advertisement
Table of Contents
