Table of Contents
Advertisement
Set value
Setting item
[Factory
default]
Through
Display
[Freeze]
3.
Set the camera settings.
Set value
Setting item
[Factory
default]
[0+1]
●
Camera
0+1+2
●
select
0+1+2+3
●
4.
Set the camera placement.
Setting item
Arrangement
Important
If the configuration of the connected camera is changed, the measurement result is NG (incompatible
●
image).Press the initialize button and re-do the settings.
Do not set [Camera Image Input] or [Camera Image Input HDR+] after [Panorama+].
●
FZ3 Processing Items List Manual
The latest image is always input from the camera and displayed.
The image that was scanned in the immediately preceding
measurement is displayed.
Select the combination of cameras to combine the images from.
0+1: Combine the images from Camera0 and Camera1.
0+1+2: Combine the images from Camera0, Camera1, and
Camera2.
0+1+2+3: Combine the images from Camera0, Camera1, Camera2,
and Camera3.
Set value
[Factory default]
[One line]
●
Two line
●
Description
Description
Description
Set the camera image placement.
Panorama+
3
323
Advertisement
Table of Contents
