Table of Contents
Advertisement
Barcode+
This is a processing item for just FZ3-H
Read in barcodes.
Processing can also classify the read-in results.
This processing item is for monochrome only.When using a color camera, insert a color gray filter before
this processing item. If a color image is input, it is NG (incompatible image).
Used in the Following Case
To read in barcodes and output them to an external device
●
Important
When FZ3-H
series dedicated processing items are used, processing is carried out that reduces the
●
processing time from the second time on. Therefore, when measuring the same image, the processing for the
first time after the controller is started up may be longer than the processing time from the second time on.
Settings Flow (Barcode+)
Barcode+ can be set up as follows.
FZ3 Processing Items List Manual
series high grade controllers.
Barcode+
261
2
Advertisement
Table of Contents
