[Black]
●
White
●
Background
Red
●
color
Green
●
Blue
●
Through/
Through
●
Freeze
[Freeze]
●
Measurement
●
image
[All color
●
Type of
image]
image
Color
●
selected
image
Binary image
●
Region Setting (Extract Color Filter)
Use a rectangle to specify the area where the model is searched.
Instead of measuring the entire input image, narrowing the measurement area shortens the processing
time.
1.
In the Item Tab area, tap [Region setting].
2.
Tap [Edit].
The figure setting area is displayed.
3.
Specify the area in which to search for the model.
The rectangle covering the entire screen is set. Adjust the size and position of the rectangle.
4.
Tap [OK].
The area to measure is registered.
Output Image (Extract Color Filter)
Setting item
Output image setting
FZ3 Processing Items List Manual
The background section outside the extracted image is filled
with the specified colors.
The background colors that can be set depend on the display
settings.
When "Color selected image" is selected, the background color
can be set for each selected color.When All color image is
selected, the background color for color extraction range 0 is
used.
For Through, the latest image from the camera is always
displayed; for Freeze, the image that was scanned in the
immediately preceding measurement is displayed.
This sets the state of the image to display.
Set value
[Factory default]
[Binary image]
●
All color image
●
Description
This sets the state of the image output.
Extract Color Filter
3
309