Output Parameters (Circle Angle); Key Points For Test Measurement And Adjustment (Circle Angle) - Omron XPECTIA FZ3 User Manual

Output Parameters (Circle Angle)

Specify how to treat the coordinates to be output to the external device as measurement results.This
item can be changed if necessary.Normally, the factory default value will be used.
Important
After setting up the measurement parameters, changing the output parameters will cause measurement results
●
to vary accordingly.If the output parameters have been changed, re-specify the measurement, too.
1.
Tap [Output parameter] in the Item Tab area.
2.
Set up each item.
Set value
Setting item [Factory
default]
[After
●
Output scroll]
Coordinates Before
●
scroll
[OFF]
●
Calibration
ON
●

Key Points for Test Measurement and Adjustment (Circle Angle)

The following content is displayed in the "Detail result" area as text.
Displayed items
Judgement
Rotation angle
Center position X
Center position Y
Reference angle
Reference X
Reference Y
Key Points for Adjustment
Select the adjustment method referring to the following points.
FZ3 Processing Items List Manual
As measurement results, select whether to output coordinate values
to external devices before or after the position deflection correction is
applied.
Select whether to reflect the calibration in the values output to the
external device as measurement results.
ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
Judgement result
Measured Angle
Center position X of circle in measurement results
Center position Y of circle in measurement results
Angle of the circle drawn as the measurement region
Reference position X of the circle drawn as the measurement region
Reference position Y of the circle drawn as the measurement region
Description
Description
Circle Angle
2
279