Key Points For Test Measurement And Adjustment (Character Inspection) - Omron XPECTIA FZ3 User Manual

Setting item
Reflect to overall
judgement
Character
output
Character
Output
output
device

Key Points for Test Measurement and Adjustment (Character Inspection)

The following content is displayed in the "Detail result" area as text.
Displayed
Color of display
items
OK/Unmeasured: Black
Judge
NG: Red
0: Black
NG Cause
Other than 0: Red
When the NG cause is the character
Chara count count NG: Red
Other NG: Black
When the NG cause is verification NG:
Read string Red
Other NG: Black
When the NG cause for each
character is the correlation value NG:
Correlation
Red
Other NG: Black
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
When the reading is unstable
Parameter to be
adjusted
If characters are close, specify larger values for "Horizontal succession", "Vertical
Measurement
succession".
FZ3 Processing Items List Manual
Set value
[Factory default]
Select whether have the judgement result of this
[ON]
●
processing unit reflected in the overall judgement
OFF
●
of the scene.
[Unchecked] Specify whether to output read-in character strings
●
Checked to an external device.
●
When "Character output" is checked (output), this
specifies the device to which strings are
[RS-232C/
●
output.Character strings are output as ASCII code
RS-422]
character strings. When kanji or other characters
Ethernet
●
that are not ASCII codes are included, they are not
output correctly.
Judgement result
The following character strings are displayed.
The larger numbers have priority.
0: OK
1: Correlation values NG
2: Character count NG
4: Verification NG
The number of measured characters is displayed.
A character string read from the target unit is displayed.
The correlation values for each character are displayed.
Example) When 0123 is read
Correlation values: 0(99) 1(56) 2(80) 3(27)
Remedy
Description
Description
Character Inspection
2
241