Measurement Results For Which Output Is Possible (2D Codes+) - Omron XPECTIA FZ3 User Manual

When the measurement results are unstable
When codes cannot be read in correctly
Parameter to be adjusted
Region setting
Measurement

Measurement Results for Which Output Is Possible (2D Codes+)

The following values can be output using processing items related to results output. It is also possible to
reference measurement values from expressions and other processing units.
Measurement items
Judgement
Number of decoded characters
Index
Integrated quality
Contrast
Modulation
Fixed pattern damage
Decode
Axis non-uniformity
Grid non-uniformity
Correction of error not used
About Output at PLC Link
1.
About output by 2D codes+
If PLC link communication is performed, selecting the "Character output" check box among the
Output parameter will cause character string data to be output to the PLC link output area. (FZ3
Ver. 2.10 or later)
If 32 characters are read with ASCII code (read character string: 0123456789...UV), a
continuous ASCII code data string is output as shown below.
Output area
Top channel Name
1st character,
+0ch
2nd character
3rd
+1ch character, 4th
character
･
･
･
31st
character,
+15ch
32nd
character
FZ3 Processing Items List Manual
Check whether there are codes to read in the measurement region.
Check whether "Code type"and "Color" has been set correctly.
Character
string
JG Judgement result
DN Number of decoded characters
Index matched as the result of comparison with the
IDX
classification comparison character strings
G0 Integrated quality
GD1 Contrast
GD2 Modulation
GD3 Fixed pattern damage
GD4 Decode
GD5 Axis non-uniformity
GD6 Grid non-uniformity
GD7 Correction of error not used
3031 (ASCII code corresponding to character "0," ASCII code
corresponding to character "1")
3233 (ASCII code corresponding to character "2," ASCII code
corresponding to character "3")
5556 (ASCII code corresponding to character "U," ASCII code
corresponding to character "V")
Remedy
Description
Output contents
2D Code+ 273
2