Table of Contents
Advertisement
Focus
This function helps you to bring the camera into focus.
Used in the Following Case
Use this function to make adjustments so as to facilitate inspection of input images that tend to
●
become out of focus.
Measurement Parameters (Focus)
Measurement parameters can be changed as needed to address unstable focus values.
1.
In the item tab area, tap [Measurement].
2.
In the "Display" area, tap [Change display] to switch between camera image types.
(Re-measurement images are not shown on the setting window.)
Setting
Setting item
value
Through
ON
Freeze
3.
Set the focus value.
The focus value is displayed chronologically in real time in the graph area.
FZ3 Processing Items List Manual
The latest image is always input from the camera and displayed.
The image that was scanned in the immediately preceding
measurement is displayed.
Description
Focus
389
4
Advertisement
Table of Contents
