When magnification is not the same in the X and Y directions
●
Specify 3 points.
Note
When 2 points are specified, the coordinate system is set to the left-hand system (forward in the clockwise
●
direction). Specify 3 points to perform calibration including the coordinate system.
1.
In the Item Tab area, tap [Calibration].
2.
In the "Calibration setting" area, select "Specify point".
3.
Tap the first point on the screen.
4.
Input the actual coordinates for the specified point.
The actual coordinate input window is displayed.
FZ3 Processing Items List Manual
Camera Image Input
25
1