Table of Contents
Advertisement
2
Item List for Scan Edge Width
Item name
Region
setting
Edge color
(for color
cameras
only)
Measurement
Judgement
Output
parameter
Region Setting (Scan Edge Width)
This item is used to set up the measurement area.
Specify the measurement region of [Scan Edge Width] by using a wide line.
1.
In the Item Tab area, tap [Region setting].
2.
Use the Drawing tools to specify the measurement region.
To align with the measurement area and change the number of divisions, uncheck this.
146
Scan Edge Width
This item is used to set up the measurement area.
Reference:
Region Setting (Scan Edge Width) (p.146)
This item selects the color information for the edges to be detected.
Reference:
Edge Color Specification - For Color Cameras Only (Scan Edge Width) (p.148)
This item changes the measurement parameter as necessary when the measurement result is
unstable.
The displayed items depend on whether your camera is a color or monochrome camera.Normally,
the factory default value will be used.
Reference:
Measurement Parameters (Scan Edge Width) (p.149)
This item specifies the judgement condition for measurement results.
Reference:
Judgement Conditions (Scan Edge Width) (p.151)
This item can be changed if necessary.Normally, the factory default value may be used.
Select the measurement result coordinates and set how to handle the coordinates.
Reference:
Output Parameters (Scan Edge Width) (p.152)
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
