Parallel Judgement Output
Used in the Following Case
Used when outputting judgement results to external devices such as a programmable controller
●
or PC via the parallel interface.
6
Important
When performing measurements in the ADJUST window, the values are only output when external output is
●
enabled by the following method during the measurement.
In the Control area, check "Output" in [Test measurement].
●
When the measurement is executed in the RUN window, output is executed regardless of the external output
setting.
Even if this processing item is not set up in the scene, the overall judgement for the set processing items is still
●
output via the OR signal from the parallel interface.
Settings (Parallel Judgement Output)
This sets the data for outputting judgement results in parallel.
Up to 16 target data items (0 - 15) can be set.
1.
In the Item Tab area, tap [Setting].
418
Parallel Judgement Output
FZ3 Processing Items List Manual