Table of Contents
Advertisement
A message which indicates the number of registered models is displayed.
12.
Tap [OK].
The model is registered.
With the same operation, register the models for the other extraction regions.
2
Key Points for Test Measurement and Adjustment (Model Dictionary)
The following content is displayed in the "Detail result" area as text.
Judge
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
Parameter to
be adjusted
Model
parameter
Measurement If images that should be judged OK vary greatly, specify a smaller value for "Candidate level".
When the processing speed is slow
Parameter to
be adjusted
Model
parameter
Measurement If images that should be judged OK vary little, specify a larger value for "Candidate level".
Measurement Results for Which Output Is Possible (Model Dictionary)
The following values can be output using processing items related to results output.It is also possible to
reference measurement values from expressions and other processing units.
Measurement items
Judgement
260
Model Dictionary
Displayed items
If the model image consists of detailed figures, specify a larger value for "Stab.".
When "Rotation" is selected, if the model shape is complex, uncheck the "Smart mode" option.
If the model image is a simple figure or a large figure, specify a smaller value for "Stab."If lowering
stability does not speed up processing, it is likely that many candidates have been detected. Raise
the "Candidate level" in [Measurement].
When "Rotation" is selected, if the model shape is simple, place a check at the "Smart mode"
option.
JG
Description
Judgement result
Remedy
Remedy
Character string
Judgement result
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
