Reference Position (Labeling+) - Omron XPECTIA FZ3 User Manual

5.
If necessary, in the "Display setting" area, set up display settings for the images displayed in the
Image Display area.
For color cameras:
Setting item
[Factory default]
Extract [Checked]
●
image Unchecked
●
For monochrome cameras:
Setting item
Binary image

Reference Position (Labeling+)

This item can be changed if necessary.When the region is set, the reference position is automatically set
at the center of gravity of the measurement region.In the same way for the reference area, when the
region settings are made, they are set automatically based on the measurement region.
This item can be used to change the reference position to any desired position.
1.
In the Item Tab area, tap [Ref. position].
In the Image Display area, the current reference position will be displayed as the crosshair
cursor.
2.
Tap the position to be set as the reference position.
FZ3 Processing Items List Manual
Set value
If you place a check at this option, images set with color
specification are displayed.
Set value
[Factory default]
[Checked]
●
Unchecked
●
Description
Description
The image is displayed in binary with black and
white.
Labeling+ 197
2