Table of Contents
Advertisement
Rotation
Angle range
2
Skipping angle
Reverse
Size change
2.
When the "Size change" option is checked, tap [Detail setting].
The "Model parameter: Size change" area is displayed.
Setting item
Move axis
Move range
Skipping
width
3.
Tap [Return].
The "Model parameter" area is displayed.
Mask any Unnecessary Items.
By registering a mask, the part you do not want included in the model is excluded.
76
ECM Search
Setting value
Setting item
[Factory default]
Checked
●
[Unchecked]
●
Upper limit
-180 to [180]
value
Lower limit
[-180] to 180
value
1 to 30
[5]
Checked
●
[Unchecked]
●
Checked
●
[Unchecked]
●
Setting value
[Factory
default]
[XY]
●
X
Specify the model variable direction.
●
Y
●
50 to 150
Specify the range in which to change the model size.
[90,110]
Specify the skipping percentage within the move range by which to
1 to 99
change models being created. A smaller skipping width increases
[10]
precision, but slows down the processing.
Description
When the measurement object is rotating,
select the "Rotation" check box and specify
how many degrees the model created rotates
each time and through what range of angles.
A smaller skipping angle increases stability,
but slows down the processing. The normal
direction is clockwise.
Specify how many degrees the model created
rotates each time. A smaller angle increases
stability, but slows down the processing.
Specify whether to allow the reverse of light
and dark for the model.
Specify whether to allow size change for the
model.
When checked, tap [Detail setting] and
specify a value for each item.
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
