Reflect to
[ON]
●
overall
OFF
●
judgement
Key Points for Test Measurement and Adjustment (Scan Edge Position)
In addition to the camera input image, the measured region, a graphic display of the measured results,
and the edge position (the crosshair cursor) are also displayed as results in the Image Display area.
The following content is displayed in the "Detail result" area as text.
Displayed items
Judge
Judgement result
Peak edge position X X coordinate of the edge that is the furthest from the start point of the measurement region
Peak edge position Y Y coordinate of the edge that is the furthest from the start point of the measurement region
Bottom edge position
X coordinate of the edge that is the closest to the start point of the measurement region
X
Bottom edge position
Y coordinate of the edge that is the closest to the start point of the measurement region
Y
Edge position X Ave. The average of X coordinates of all the edges
Edge position Y Ave. The average of Y coordinates of all the edges
Long distance Max.
The maximum distance between the approximate line and edge position (plus direction)
The minimum distance between the approximate line and the edge position (minus
Short distance Max.
direction)
Deviation
Deviations in concavity and convexity
The straight line's inclination against the measurement region does not include 180, which
Line angle
is displayed as -180.
Lost point count
Number of parts for which the detection of edges has failed
Key Points for Adjustment
Select the adjustment method referring to the following points.
FZ3 Processing Items List Manual
Enables choosing whether or not the judgement results of this
processing unit is reflected in the scene overall judgement.
Description
Scan Edge Position
143
2