Region Setting (Edge Position) - Omron XPECTIA FZ3 User Manual

List of Edge Position Items
Item name
Region This item is used to set up the measurement area.
setting Reference:
Edge color
(for color If the color of the edges to be detected is decided, specify the color.
cameras Reference:
only)
The edge position is registered as the reference when the region is set.Change as necessary.
Ref. position
Reference:
This item specifies the judgement condition for measurement results.
Measurement parameter can be changed as needed to address unstable measurement results.
Measurement The displayed items depend on whether your camera is a color or monochrome camera.Normally,
the factory default value will be used.
Reference:
This item can be changed if necessary.Normally, the factory default value may be used.
Output
Select the measurement result coordinates and set how to handle the coordinates.
parameter
Reference:

Region Setting (Edge Position)

This item is used to set up the measurement area.
Use a straight line (arrow), circumference, or arc to specify a measurement region for [Edge position].
FZ3 Processing Items List Manual
Region Setting (Edge Position) (p.115)
Edge Color Specification - For Color Cameras Only (Edge Position) (p.117)
Reference Position (Edge Position) (p.118)
Measurement Parameters (Edge Position) (p.119)
Output Parameters (Edge Position) (p.122)
Description
Edge Position 115
2