Color Gray Filter; Filter Setting (Color Gray Filter) - Omron XPECTIA FZ3 User Manual

Color Gray Filter

This processing item converts a color image input from a color camera into a monochrome image.
The available filters are "Primary color filter (RGB)", "Complementary color filter (CMY)", "Brightness
filter", and "HSV filter."
This processing item cannot be used with monochrome images.Such use causes a judgement of NG
(incompatible image).
3
Note
The processing items after [Color Gray Filter] are the same as when a monochrome camera is connected.
●
Used in the Following Case
To convert a color image to a monochrome image with a specific color enhanced
●

Filter Setting (Color Gray Filter)

This item sets the filter.
1.
In the Item Tab area, tap [Filter Setting].
2.
In the "Display mode" area, tap [Change display] to switch between camera image types.
302 Color Gray Filter FZ3 Processing Items List Manual