Omron XPECTIA FZ3 User Manual page 163

List of Gravity and Area Items
Item name
Color
This item selects the color whose area and center of gravity are to be measured.Since the color
(for color
hue, color saturation, and brightness can be selected, then fine-tuning can be performed to colors.
cameras
Reference:
only)
Binary This item specifies the binary level for converting 256-tone grayscale images input from the camera
(for into binary images.
monochrome Converted white pixels are measured.Adjust the binary level so that the measurement object is
cameras converted to white pixels.
only) Reference:
This item is used to set up the measurement area.
Region While the input image can be measured as a whole, a quick and reliable measurement can be
setting performed by set up the measured range.
Reference:
This item can be changed if necessary.Usually, the central position of the registered region is
Ref. position registered as the reference position.
Reference:
This item specifies the judgement condition for measurement results.Specify the upper and lower
limit values for the area and the gravity center X/Y.
Measurement Measurement parameter can be changed as needed to address unstable measurement results or to
increase the processing speed.Normally, the factory default value will be used.
Reference:
This item can be changed if necessary.Normally, the factory default value will be used.
Output
Use the output parameter to specify how to handle the coordinates.
parameter
Reference:
FZ3 Processing Items List Manual
Color Specification (Gravity and Area) (p.162)
Binarization (Gravity and Area) (p.164)
Region Setting (Gravity and Area) (p.165)
Reference Position (Gravity and Area) (p.166)
Measurement Parameters (Gravity and Area) (p.167)
Output Parameters (Gravity and Area) (p.169)
Description
Gravity and Area
2
161