2
Outside
trimming
Sort type
Label No.
3.
If necessary, in the "Display setting" area, set up display settings for the images displayed in the
"Image display" area.
For color cameras:
Extract image
180
Labeling
Checked
●
[Unchecked]
●
Area ascending
●
[Area descending]
●
X ascending
●
X descending
●
Y ascending
●
Y descending
●
Elliptic major axis ascending
●
Elliptic major axis descending
●
Elliptic minor axis ascending
●
Elliptic minor axis descending
●
Elliptic ratio ascending
●
Elliptic ratio descending
●
Rectangle width ascending
●
Rectangle width descending
●
Rectangle height ascending
●
Rectangle height descending
●
Rectangle X1 ascending
●
Rectangle X1 descending
●
Rectangle Y1 ascending
●
Rectangle Y1 descending
●
[0] to 2499
Setting value
Setting item
[Factory default]
[Checked]
●
Unchecked
●
This option can be used only when there is a
section of the designated color in the
measurement region that does not need to
be measured.
When "Checked" is set, the whole area
outside of the measurement region is
extracted as having the specified color.
Specify the conditions by which label number
is re-assigned.
When sorting referencing the X and Y
coordinates, the upper left is the origin.
Input the label No. for the data to be output.
Description
If you place a check at this option, image set with
the color specification is displayed.
FZ3 Processing Items List Manual