Measurement Results For Which Output Is Possible (Precise Defect) - Omron XPECTIA FZ3 User Manual

Displayed items
Judge
Defect value
Defect X
Defect Y
Area
2
Gravity X
Gravity Y
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
Noise is detected as defects.
Parameter to be adjusted
Measurement
Judgement will be NG.
Parameter to be adjusted
Measurement
When the processing speed is slow
Parameter to be adjusted
Measurement

Measurement Results for Which Output Is Possible (Precise Defect)

The following values can be output using processing items related to results output.It is also possible to
reference measurement values from expressions and other processing units.
Measurement items
Judgement
Defect
Measurement
coordinate X
Measurement
coordinate Y
Defect area
Gravity X
Gravity Y
224 Precise Defect
Judgement result
Measured defect level
X Coordinate of measured defect position
Y coordinate of measured defect position
The measured maximum defect area
Center of gravity X coordinate of the measured maximum defect area
Center of gravity Y coordinate of the measured maximum defect area
Specify a larger value for "Defect judge" in the judgement conditions.
Make the measurement region larger than the value of the element size.
Specify a larger value for the element creation interval.
Character
string
JG Judgement result
F Measured defect level
X X Coordinate of measured defect position
Y Y coordinate of measured defect position
AR The measured maximum defect area
GX The center of gravity X coordinates of the measured maximum defect area
GY The center of gravity Y coordinates of the measured maximum defect area
Description
Remedy
Remedy
Remedy
Description
FZ3 Processing Items List Manual