Table of Contents
Advertisement
2.
In the "Display" area, tap [Change display] to switch between camera image types.
The displayed contents of the Image Display area will be switched.
Setting item
3
Display
3.
Set the background suppression level.
There are two setting methods: specifying the section in the image whose contrast is to be
emphasized or specifying the extraction range with numeric values.
For color cameras:
Item
Suppression
level
300
Background Suppression
Set value
[Factory
default]
Through
The latest image is always input from the camera and displayed.
The image that was scanned in the immediately preceding
[Freeze]
measurement is displayed.
Set value
[Factory
default]
RGB
The upper and lower limits for the background suppression level are
common
set in common for RGB.The range from the set minimum to the set
0 to 255
maximum is converted to 0 to 255.
RGB
The maximum and minimum for the background suppression level are
individual
independently for RGB.The range from the set minimum to the set
0 to 255
maximum is converted to 0 to 255.
Description
Description
FZ3 Processing Items List Manual
Advertisement
Table of Contents
