Key Points For Test Measurement And Adjustment (Ec Circle Search) - Omron XPECTIA FZ3 User Manual

2.
Specify a value for the items.
2
Setting item
Output
Coordinates
Calibration
Reflect to
the overall
judgement
Note
For details on output coordinates and calibration, see Reference: "User's Manual", "Handling Coordinates" (p.307) .
●

Key Points for Test Measurement and Adjustment (EC Circle Search)

The following content is displayed in the "Detail result" area as text.
Displayed items
Judge
Position X
Position Y
Evaluation
Radius
Search count
Key Points for Adjustment
Select the adjustment method referring to the following points.
When the measurement results are unstable
Parameter to be adjusted
Measurement
92 EC Circle Search
Set value
[factory
default]
[After
●
As measurement results, select whether to output coordinate values
scroll]
to external devices before or after the position deflection correction is
Before
●
applied.
scroll
Select whether to reflect the calibration in the values output to the
[OFF] external device as measurement results.
●
ON ON: Output the coordinates converted into actual dimensions.
●
OFF: Output the camera coordinate values.
[ON] Enables choosing whether or not the judgement results of this
●
OFF processing unit is reflected in the scene overall judgement.
●
Judgement result
X coordinate of the position where the model is detected
Y coordinate of the position where the model is detected
Circle evaluated value of circles detected
Radius of circles detected
Quantity of circles detected
If images that should be judged OK vary greatly, specify a smaller value for
"Evaluation".
Description
Description
Processing
FZ3 Processing Items List Manual