Model Automatic Registration (Model Dictionary) - Omron XPECTIA FZ3 User Manual

Detail
candidate

Model Automatic Registration (Model Dictionary)

2 This method encloses a character string, cuts out one character at a time from it and registers them as
models.When an auto extraction region is set enclosing the character string, the characters are
automatically extracted one at a time. Register each character in the appropriate character index. If 5
models have already been registered for an index, auto registration cannot be set.
1.
In the Item Tab area, tap [Auto registration].
2.
In the Detail area, select "Auto extract region".
3.
Tap [Edit].
4.
Specify the range to register as the auto extract region using the drawing tools.
5.
In the figure setting area, tap [OK].
The auto extract region is registered.
6.
Tap [Extract model].
A model is extracted automatically and the extracted result (gray frame) is displayed in the Image
Display area.
258 Model Dictionary
Specify the threshold value with which to detect candidate
0 to 100
points in a detail search.Only the candidate points higher than
[60]
this level are extracted as characters.
FZ3 Processing Items List Manual