Table of Contents
Advertisement
1
Actual coordinate
Point X, Y
Actual X, Y
5.
Set the 2nd and 3rd points in the same way.
6.
Tap [Generate calibration parameters].
The calibration parameters will be generated.
Setting Calibration through Sampling Measurement (Sampling)
This is a method for setting calibration based on measurement results.
Calibration parameters are calculated automatically when a registered model is searched and the actual
coordinates for that position entered.
1.
In the Item Tab area, tap [Calibration].
2.
In the "Calibration setting" area, select "Sampling" .
26
Camera Image Input
[Factory default]
0 to 9999.9999 [Point you tapped in the window]
-99999.9999 to 99999.9999 [0]
Set value
FZ3 Processing Items List Manual
Advertisement
Table of Contents
