Table of Contents
Advertisement
Setting
methods
Image
Specify a region on the image that includes the target color.The average color of the
Display area
specified region is registered.
Tap the color on the color chart to specify it.The RGB values for the specified color
Color chart
are displayed at the bottom.
R, G, B
The color to be detected is set with the RGB values.
This sets the allowable color difference for detecting the edge, using the specified
Difference
color as the reference.The larger the difference values, the larger the color range
R, G, B
that is used to detect the edge.
Measurement Parameters (Edge Pitch)
This item specifies the judgement condition for measurement results.Also specify the range for positions
to be judged as OK.
1.
In the Item Tab area, tap [Measurement].
The edge profile of the measurement region (straight line) is displayed in the Image Display area.
2.
If necessary, specify a value for each item in the "Measurement condition" area.
For color cameras:
FZ3 Processing Items List Manual
Description
Edge Pitch
127
2
Advertisement
Table of Contents
