Detection Point (Sensitive Search); Reference Position (Sensitive Search) - Omron XPECTIA FZ3 User Manual

Detection Point (Sensitive Search)

Specify a position in the model that should be used as the detection coordinates during
measurement.Usually, the central position of the set model is registered as the detection point.This
function is used to change to any desired position.
Note
After changing the detection coordinates to another position, re-registering the model will change it back to the
●
central coordinates of the model.
1.
In the Item Tab area, tap [Detection point].
In the Image Display area, the current detection point is displayed with a crosshair cursor.
2.
Tap the position to be set as the detection point.
Note
Displaying the image enlarged makes this tapping easier.
●
Reference: "Using the Zoom Function" in the "User's Manual" (p.317)
3.
If necessary, finely adjust with numeric input and the arrow buttons.

Reference Position (Sensitive Search)

When the model is set, this position is automatically set at the same time as the reference position.This
item can be used to change the reference position to any desired position.This is handy for measuring
the positional deviation from a certain position.
1.
In the Item Tab area, tap [Ref. position].
In the Image Display area, the current reference position will be displayed as the crosshair
cursor.
FZ3 Processing Items List Manual Sensitive Search 67
2