BG color
2
Image kind
Binarization (Labeling+)
When a monochrome camera is connected, the 256-tone grayscale images taken in from the camera
are converted into binary black-and-white images before the images are measured.Converted white
pixels are measured.
This specifies the level for converting grayscale images into binary images.
1.
In the Item Tab area, tap [Binary].
2.
In the "Binary kind" area, set the type of binarization.
Setting item
Binary kind
3.
In the "Binary setting" area, specify the reference density range.
When binarization is selected
194
Labeling+
[Black]
●
White
●
The background section outside the extracted image is filled
Red
●
with the specified colors.
Green
●
Blue
●
Measurement
●
image
[All color
●
image]
This sets the state of the image to display.
Selection color
●
image
Binary image
●
Set value
[Factory
default]
Convert 256-grayscale images to binary images.The binary level that
[Binary]
is the conversion threshold is held constant.
The binary level is not held constant.Stable binary images can be
Dyn
obtained by taking the difference between the input image and that
threshold
input image after it has been subject to brightness averaging. This
option is effective when the lighting is unstable.
Description
FZ3 Processing Items List Manual