2.
Tap the position to be set as the reference position.
2
Note
Displaying the image enlarged makes this tapping easier.
●
Reference:
3.
If necessary, finely adjust with numeric input and the arrow buttons.
To remeasure on the displayed image and set the reference position, tap [Measure ref.].
Measurement Parameters (Search)
Specify the search measurement conditions and the judgement conditions for the measurement results.
1.
In the Item Tab area, tap [Measurement].
2.
In the "Measurement condition" area, specify a value for each item.
Setting item
Sub-pixel
48
Search
"Using the Zoom Function" in the "User's Manual" (p.317)
Set value
[factory default]
When a check is placed at sub-pixel, the position information can
Checked
●
be measured in units of sub-pixels.However, this requires more
[Unchecked]
●
processing time.
Description
FZ3 Processing Items List Manual