Reference Position (Ecm Search) - Omron XPECTIA FZ3 User Manual

2.
Tap the position to be set as the detection point.
Note
Displaying the image enlarged makes this tapping easier.
●
Reference: "Using the Zoom Function" in the "User's Manual" (p.317)
3.
If necessary, finely adjust with numeric input and the arrow buttons.

Reference Position (ECM Search)

When the measurement region is set, this position is automatically set at the same time as the reference
position.This item can be used to change the reference position to any desired position.This is handy for
measuring the positional deviation from a certain position.
1.
In the Item Tab area, tap [Ref. position].
In the Image Display area, the current reference position will be displayed as the crosshair
cursor.
2.
Tap the position to be set as the reference position.
FZ3 Processing Items List Manual ECM Search 79
2