Measurement Parameters (Edge Position) - Omron XPECTIA FZ3 User Manual

2.
Tap the position to be set as the reference position.
3.
If necessary, finely adjust with numeric input and the arrow buttons.
To remeasure on the displayed image and set the reference position, tap [Measure ref.].

Measurement Parameters (Edge Position)

This item specifies the judgement condition for measurement results.Measurement parameter can be
changed as needed to address unstable measurement results.
1.
In the Item Tab area, tap [Measurement].
The edge profile of the measurement region is displayed as a graph in the Image Display area.
FZ3 Processing Items List Manual Edge Position 119
2