Functions; Output From The Inverter To The Network - Mitsubishi Electric 800 Series Instruction Manual

5

FUNCTIONS

5.1

Output from the inverter to the network

Main items to be output from the inverter (FR-A8NP) to the network and their descriptions are explained below.
Item
Inverter monitor Monitor various items such as inverter output frequency and output current.
Parameter read Read parameter settings of the inverter.
Inverter status Monitor output signal of the inverter.
Operation mode read Read the operation mode of the inverter.
Set frequency read Read the frequency set in the inverter.
Terminal input read Read the analog value of terminal 2, 4, 1.
Node address read Read node address of the inverter.
Monitor alarm history occurred in the inverter, and energization time, output
Alarm definition read frequency, output current and output voltage at alarm occurrence are
monitored.
PNU list read Read the available PNU number.
NOTE
• Refer to the Instruction Manual (Detailed) of the inverter for functions controllable from the network in each operation mode.
36
FUNCTIONS
Description
Refer to page
PPO type PPO type non-
support support
specification specification
54, 61 86
52, 71 82, 90
54 84
54, 62 88
62 89
62 89

66
66 89

70