Honda Accord 2008 Manual page 1309

07/11/02 09:20:16 61TA0000_170_0043
Power Steering
Steering Gearbox Removal (cont'd)
38. Lower the jack slowly until the front subframe has
dropped about 69 mm (2 11/16 in.).
＊２３
39. Carefully move the steering gearbox (A) toward the
driver's side until the pinion shaft clears the
fenderwell opening on the body.
＊２４
17-42
40. Remove the steering gearbox (A) through the
69 mm (2 11/16 in.)
41. Remove the pinion shaft grommet (A) from the top
A
42. After removing the steering gearbox, make sure
fenderwell opening on the driver's side.
of the valve housing.
that no power steering fluid gets on the gearbox
mount cushions, gearbox housing, surface of the
front subframe and stiffener. Wipe off any spilled
fluid at once.
＊２５
A
＊２６
A