07/11/02 09:38:24 61TA0000_200_0232
Seats
Rear Seat Armrest Beverage Holder
Replacement (cont'd)
2. Release the front hooks (A) from the wire (B), then
remove the beverage holder (C).
*02
3. Install the beverage holder in the reverse order of
removal. Make sure the front hooks are installed
securely to the wire, then push down on the
beverage holder, and install the rear hooks into the
wire securely.
20-230
20-230
C
A
B
Rear Seat-back Cover Replacement
2-door
NOTE:
• Put on gloves to protect your hands.
• Take care not to tear the seams or damage the seat
covers.
1. Remove the seat-back (see page 20-222).
2. Remove all of the head restraints.
3. Remove the screw, then remove the center belt
guide (A).
Fastener Location
: Screw, 1
TA08AB2J46166453951KBAT00
A
*01