Honda Accord 2008 Manual page 1760

07/11/02 09:37:09 61TA0000_200_0193
5. While holding the torsion bar (A) twisted, pull the
end of it out of the seat frame, then carefully loosen
the torsion bar.
＊０２
B
6. Remove the other side end of the torsion bar from
the hook (B), then remove the torsion bar from the
seat frame.
7. Install the torsion bar in the reverse order of
removal.
A
A
A
Rear Seat Access Cable
Replacement
2-door Passenger's Seat (Manual Seat)
NOTE:
• Put on gloves to protect your hands.
• Take care not to kink the cable.
• The right rear seat access cable is shown; the left rear
seat access cable is symmetrical.
1. Remove the front seat (see page 20-180).
2. Remove the seat cushion cover/pad (see page
20-208).
3. Note positions of the rear seat access cable (A),
then remove the cable.
A
ＴＡ０８ＡＢ２Ｊ４６１６６４５３０４１ＫＢＡＴ００
＊０１
(cont'd)
20-191 20-191