Honda Accord 2008 Manual page 1739

07/11/02 09:36:13 61TA0000_200_0172
Dashboard
Dashboard/Steering Hanger Beam Removal/Installation (cont'd)
Middle portion (passenger's side)
6. From under the dash, disconnect the A/C wire
harness connector (A).
＊１１
Passenger's side
7. From under the dash, disconnect the passenger's
door wire harness connector (A), the right side wire
harness connectors (B), the antenna lead connector
(C), and the right engine compartment wire harness
connectors (D). Disconnect the dashboard wire
harness connectors (E) and the audio wire harness
connector (F) from the passenger's under-dash
fuse/relay box (G). Detach the harness clip (H). With
premium sound system: Disconnect the stereo
amplifier connectors (I).
＊１２
I
D
E
D
8. Detach all of the harness and the connector clips.
20-170
A
E
F
G
B
9. Detach the harness clip (A) and the clip fastening
the relay (B) from the brake pedal support member
(C). Remove the bolts (D, E), then remove the
member, and disconnect the TPMS control unit
connector (F).
Fastener Locations
B : Bolt, 1
A
C
10. Remove bolts (A, B), then remove the center joint
bracket (C).
Fastener Locations
A : Bolt, 2
A
C
A
B
H
B : Bolt, 1
F
D E
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
B : Bolt, 2
8 x 1.25 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
B
B
A
C
＊１３
B
＊１４